Satech goal is to provide safety in workplace and job sites in accordance with European Union and the International Directives. For this reason Satech business focuses on boundary protections whose design/production is handled in-house. The solutions put forward by Satech are various and concern panels, special doors, locks, junctions, relays and other accessories relating to machinary protection.
The accident prevention system consists of 40x40 uprights and 20x20 panels with 20x20 frames, connected by screws or SATECH patented fast assembly clamps. Satech has developed a connecting system between panel and upright that achieves remarkable time savings during assembly and height adjustment. Compared to traditional system, it allows to have 25% time saved.
SHEET METAL PANELS
The 1.2 mm thick steel sheet panels are used when it is necessary to contain the protection of ejected parts and scraps when it is not possible to use the mesh panels. They can be provided in both 20×20 or 30x30mm frames, with or without inspection windows in transparent polycarbonate or in adiactinic material to contain the UV radiation of the welding areas. Shaped frameless self-supporting lightweight panels are also available.
Fall Prevention System Series for walkways or raised areas has been designed to prevent the worker from falling. It is modular and can be completely dismantled. The protection is manufactured according to the ISO international standards. The assembly can be angular (40x40 tubular uprights and beams) or linear (40x40 tubular uprights and beams), while the anchorage can be in two alternative ways: front anchorage to the gallery by means of screws or floor anchorage with base plate.
BlueGuard modular system is the Satech’s system that combines safety, flexibility and compliance with the high hygiene standards required by the agro-food, chemical and pharmaceutical markets.
The frameless 4 mm welded wire panel strengthened by transversal folds is made of AISI 304 stainless steel finished by passivation. The panel is fixed to inspectable U-section posts by means of high-resistant fast captive connections made of technopolymer and stainless steel.
- Resistant to high-pressure water jets - Resistant to corrosion
PANELS Mesh: 32 x 68 x 4 mm Height: 2080 mm Bases: 484, 992, 1472, 1988 mm